คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

Avantone Pro CLA-10
Avantone Pro CLA-10 Avantone Pro CLA-10 Avantone Pro CLA-10 Avantone Pro CLA-10 Avantone Pro CLA-10

Avantone Pro CLA-10

รหัสสินค้า: AP-CLA10
8-ohm, 2-way Passive Studio Monitor with 7" Woofer and 1-3/8" Soft-dome Tweeter - Pair

สถานะของสินค้า : สินค้าพร้อมส่ง

34,000 บาท

ได้รับ 340 คะแนน เมื่อซื้อสินค้าชิ้นนี้

Exposes the Shortcomings of Your Mix

Avantone Pro's CLA10 is a modern reworking of Yamaha's NS10M — the ubiquitous white-coned studio monitor that engineers have sworn by for decades. Like the original, the CLA10 exposes every shortcoming of your mix. Nail it on a set of these, and you're guaranteed a mix that translates everywhere. Avantone has been making replacement drivers for this monitor for a while now. These direct-replacement parts were painstakingly reverse-engineered from the source components, and have garnered acclaim for replicating their sonic signature. The CLA10 takes it to the next level, reproducing the entire speaker. Avantone built the CLA10 from top-shelf materials (some of higher quality than the originals). If you want to hear your mix, this is the speaker to get.

The ultimate reality check

There's nothing flat about this studio monitor's frequency response. Like its predecessor, the CLA10 delivers a fatiguing, mid-heavy sound. And like most sealed-box speakers, it has limited bass extension. In other words, this isn't the best-sounding speaker in the world. In fact, it sounds downright dreadful in some circumstances — cold and clinical. That said, it's this quality that exposes the flaws in your mix. And that's where this monitor's magic lies — perfect your mix on a set of CLA10s, and it's sure to sound great everywhere.

Physically and sonically identical to the original

The Avantone Pro CLA10 is physically and sonically identical to the original. Its tweeter dome uses the same phenolic resin doping to match the original's performance curve. Its woofer uses custom-tooled mechanical parts that mirror the original. The CLA10's woofer cone eschews the original's curl-and-join construction for a modern pressed design, but is an exact sonic match. Avantone even sourced the cone material from the original vendor! The crossover network uses the same value capacitors. The inductors match the original in DC resistance, winding dimensions, and value. All of the CLA10's components were reverse-engineered from the original speaker for an exact match throughout the frequency range.

Meticulously tested for top-notch performance

Although the CLA10 is a veritable clone of its forerunner, it uses higher-grade components than the original. This allows for tighter production tolerance and meets current ROHS and WEEE requirements. And these monitors were tested to death — at Sweetwater, we've rarely seen such meticulous quality control. Avantone conducted hundreds of hours of testing to ensure as close a match as possible. Every component was tested in one of the world's top studios. Every magnet was tested in the gap for field density, ensuring a uniform performance curve. And before it was given the stamp of approval, a range of esteemed recording engineers reached a consensus that the CLA10 is an exact match to the original — it's the real deal!

Avantone Pro CLA10 Features:

  • Re-creation of the ubiquitous white-coned studio monitor that engineers have sworn by for decades
  • Mid-heavy sound exposes every shortcoming of your mix
  • Physically and sonically identical to the original design
  • Hundreds of hours of testing ensure as close a match as possible
  • All components were reverse-engineered from the original speaker for an exact frequency match
  • Tweeter dome uses the same phenolic resin doping to match the original's performance curve
  • Woofer uses custom-tooled mechanical parts that mirror the original
  • Crossover network uses the same value capacitors
  • Inductors match the original in DC resistance, winding dimensions, and value
  • Uses numerous higher-grade components than the original for tighter production tolerance and ROHS and WEEE compliance

เขียนรีวิวสินค้าของคุณเอง

คุณกำลังรีวิว: Avantone Pro CLA-10

คุณจะให้คะแนนสินค้านี้อย่างไร? *

  1 2 3 4 5
ราคา / ความคุ้มค่า
คุณภาพ

คุณอาจจะสนใจในสินค้าดังต่อไปนี้

  • รหัสสินค้า : AVA-CDMK8

    Avantone CDMK8

    42,000 บาท
  • รหัสสินค้า : TEL-M81SH

    Telefunken M81-SH

    13,900 บาท
  • รหัสสินค้า : CHL-GAV19T

    Chandler Limited GAV19T Guitar Amplifier

    120,000 บาท

    สินค้าหมด

  • รหัสสินค้า : AUD-iD44

    Audient iD44

    27,900 บาท
  • รหัสสินค้า : D258TR

    MOGAMI D25-8TR

    5,400 บาท
  • รหัสสินค้า : AVA-CDMK6

    Avantone CDMK6

    31,500 บาท

    สินค้าหมด

  • รหัสสินค้า : BEH-QX2442USB

    Behringer QX2442USB

    24,000 บาท
  • รหัสสินค้า : 2534-TRTR

    MOGAMI 2534 TR-TR

    1,000 บาท
  • รหัสสินค้า : BEG-UMC1820

    Behringer UMC1820

    16,500 บาท

    สินค้าหมด

  • รหัสสินค้า : ANT-ORIONSTUDIOHD

    Antelope Audio Orion Studio HD

    165,000 บาท
  • รหัสสินค้า : MOT-896MK3

    MOTU 896mk3 Hybrid

    63,900 บาท
  • รหัสสินค้า : BEY-DT990PRO

    Beyerdynamic DT 990 PRO

    7,990 บาท
expand_less