คุณยังไม่มีสินค้าในรถเข็น

คุณยังไม่มีสินค้าในรถเข็น

Royer dBooster
Royer dBooster Royer dBooster

Royer dBooster

รหัสสินค้า: ROY-DBT
In-line Signal Booster

สถานะของสินค้า : สินค้าพร้อมส่ง

ราคาปกติ: 9,500 บาท

Special Price 8,500 บาท

ได้รับ 85 คะแนน เมื่อซื้อสินค้าชิ้นนี้

Royer dBooster In-line Signal Booster

Need to increase the level of your low-output ribbon and dynamic microphones? Sweetwater has a nifty device you should know about. The Royer R-DB20 dBooster is a phantom-powered ribbon and dynamic mic signal booster and impedance buffer. It’s ideal for miking any low-volume sound source, recording direct to an audio interface, or using on long cable runs to retain sound quality. The dBooster increases the level of your passive ribbon and dynamic microphones with a minimum of distortion or coloration. Designed for professional studio and live sound applications, the dBooster provides two levels of clean gain boost — 12dB and 20dB, selectable via a front-panel switch.

Load agnostic

The dBooster maintains headroom and gain regardless of load. The dBooster’s Class A input circuitry presents a high source impedance to the microphone, which minimizes damping (loading). This reduces coloration and distortion while simultaneously maximizing headroom. You can achieve an optimal balance between gain and headroom for a variety of uses by utilizing the 12dB/20dB gain switch. The dBooster’s low-impedance output is an increased mic-level signal that can drive a standard microphone preamplifier or a digital audio interface directly. It also minimizes signal loss on long cable runs.

Royer dBooster In-line Signal Booster Features:

  • Ultra-low noise/distortion performance
  • Safe for use on all ribbon mics

  • Increases headroom at the preamp
  • Provides true electrical isolation
  • 
Protects ribbon mics from phantom power
  • 
Minimizes mic loading

  • Capable of driving difficult loads, such as mic splitters and vintage-style preamps, without increased distortion or loss of gain
  • Gain: 12dB or 20dB, switchable
  • Wide frequency response of 20Hz–20kHz (±0.25dB)
  • High input impedance of 3.6k ohms
  • Low output impedance (at 20dB setting) of 300 ohms
  • Current draw: approximately 5mA at zero signal and 7.5mA at full output
  • Balanced XLR I/O
  • Power: 48-volt phantom
  • Dimensions: 3.62" L x 2.0" W x 1.62" H
  • Weight: 6 oz.
  • Rugged case construction
  • Covered by 1-year warranty

เขียนรีวิวสินค้าของคุณเอง

คุณกำลังรีวิว: Royer dBooster

คุณจะให้คะแนนสินค้านี้อย่างไร? *

  1 2 3 4 5
คุณภาพ
ราคา / ความคุ้มค่า

คุณอาจจะสนใจในสินค้าดังต่อไปนี้

expand_less